background image

THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO

CHATSWORTH PRODUCTS, INC. ANY REPRODUCTION DISCLOSURE

OR USE OF THIS DRAWING IS EXPRESSLY FORBIDDEN EXCEPT

AS AGREED TO IN WRITING BY CHATSWORTH PRODUCTS, INC.

INSTALLATION

INSTRUCTIONS,

CUBE-IT+ CABINET

                   

                      

                    

                   

                   

           

IIS-711890,   SHEET 4 OF 4 - INSTALLATION INSTRUCTIONS, CUBE IT CABINET - 1:5 - 1-28-03 - ISS. 6 - CPI/BK

A

RUBBER GROMMETS (FOUR PROVIDED) CAN

BE INSTALLED IN LARGEST KNOCKOUT HOLE.

SLIT GROOVES WITH KNIFE TO ALLOW CABLE

PASS THROUGH

THE DOOR CAN BE HINGED FROM EITHER SIDE OF THE CABINET.

1. REMOVE THE FOUR SCREWS AND NUTS FROM THE HINGES.

2. TURN THE DOOR OVER.

3. REINSTALL THE SCREWS AND NUTS ON THE OPPOSITE SIDE.

1/2" AND 3/4" CONDUIT KNOCKOUTS

THE 1/2" MUST BE PUNCHED OUT FROM THE INSIDE

THE 3/4" MUST BE PUNCHED OUT FROM THE OUTSIDE

2" AND 2 1/2" CONDUIT KNOCKOUTS

THE 2" MUST BE PUNCHED OUT FROM THE INSIDE

THE 2 1/2" MUST BE PUNCHED OUT FROM THE OUTSIDE

DETAIL A

USE COMBINATION OF SLOTS

TO GET DESIRED RAIL DEPTH

MOUNTING EQUIPMENT RAIL

MOUNTING RAIL DEPTH CAN BE ADJUSTED BY

REMOVING NUTS AND MOVING THE RAIL TO

THE DESIRED POSITION. USE A COMBINATION

OF ONE OF THE TWO SLOTS ON THE RAIL AND

ONE OF THE SLOTS ON THE SIDE PANELS.

4

Reviews: