17
10
14
12
15
11
16
13
1
4
3
5
6
9
2
7
8
9
2
4
3
1
1
1
1. Power switch: turn on/off remote controller.
2. Power indicator: green light (high battery level); blue light (medium
battery level); red light (low battery level).
3. Wi-Fi switch button: switch between 2.4G/5G Wi-Fi
4. Remote controller connection indicator: ROV/2.4G/5G
5. One-key reset: in any posture, the ROV can be reset to the horizontal
state.
Long press to switch the control mode.
6. Unlock: lock/unlock the motor, the current state of the motor can be
confirmed in the App.
7. Fill light control button: fill light [off/medium brightness/high
brightness] control.
8. Safety buckle: can be used with a safety rope to prevent the remote
controller from falling.
9. Control stick: used to control the navigation of the ROV. Refer to the
navigation posture for specific operations.
10. Grabber claw control: short press to close and stop, long press to
open.
11. Video/Photo: short press to take photo/start or end video recording;
long press to switch between photo and video mode.
12. Right scroll wheel: none
13. Left scroll wheel: adjust the pitch angle
14. Type-C port: direct communication between the controller and the
mobile phone/tablet
15. HDMI port: 1080P high-definition real-time image output
16. Tether cable socket/charging port
17. Mobile phone/tablet bracket: used to attach the mobile phone/tablet.
Open both ends to insert the device, then press the button on the back
to tighten the device.
Note: Damage caused by immersion in liquid is not covered by the
warranty. To avoid damage, do not put the remote controller in water.
Remote controller indicator light
Battery:
The battery indicator light has three color states. Red: the red light stays on without flashing when the battery level is between 10% and 30%; the red
light flashes when the battery level is between 0% and 10%. Blue: the blue light stays on without flashing when the battery level is between 30% and
70%.
Green: the green light stays on without flashing when the battery level is between 70% and 100%.
2.4G:
Wi-Fi indicator light, always on when the 2.4G frequency band is working.
5G:
Wi-Fi indicator light, always on when the 5G frequency band is working.
ROV:
communication between the remote controller and the ROV (flashing: not connected, steady: connected).
One-key reset button:
when the machine is in a non-horizontal state, the blue light under the button is always on.
Unlock button:
after unlocking, the blue light under the button is always on.
Fill light button:
when the fill light is bright, the blue light under the button is always on. when the fill light is low, the blue light under the button flashes. when the
fill light is turned off, the blue light under the button is off.
100/200m tether cable & winder
The winder is used to store the tether cable, and the tether cable is used to connect the ROV
and the controller.
1. Tether cable socket
2. Winder shell
3. Tether cable
4. Hanging buckle
Note: Do not put the unconnected tether cable socket into the water or allow liquid to
splash into it. Check whether the O-ring on the tether cable socket is missing or damaged.
If so, please replace it before use.
Install the CHASING GO1 App
Installation and connection
CHASING GO1 App: (For iOS 9.0/Android 4.4 and above) Scan the QR code below to
download or visit the iOS App Store/Google Play to download.
Remote controller
