Charging Guide
Plug in the 5V USB charging cable and recommend to charge for 1 hour.
When the battery is fully charged, the 4-state battery indicator are all light up.
Notices
1) You need to turn on the remote controller to check the battery indicators when
charging.
2) The adapter output voltage must be 5V to avoid damaging the remote controller.
3) Do not put the remote controller in the water to avoid damaging the device.
4) Remote control bracket, remote control water damage or appearance damage is
out of warranty.
www.chasing.com
Turn Remote Controller ON to view charging status. When Charging, the
Remote Controller's Bluetooth indicator light will continue to flash while
the Power Status Indicator lights will turn on as charge increases. Each
light represents 25% of the controllers battery is fully charged.