INTELLIGENT VIDEO
ChaseCam PDR100 User Manual – 4/10/09
Page 7
The
front panel
of the PDR has one switch and one red/green LED indicator. The switch
performs multiple functions. It powers the PDR on and off, and starts and stops recording also.
The LED informs the user if the PDR is recording, ready, on or off, or displaying an error
condition. The front panel also includes an access door for the batteries and the Compact Flash
connector.
Front Panel
The
rear panel
has the connectors for the PDR.
MiniDIN connector for Video Input (and 12VDC Power Output) NOT S-VIDEO!
Microphone Input
External Audio Input using a 3.5mm to stereo Audio Adapter
LAN-C connector for use with a LAN-C device such as a remote control
Digital Interface RJ-45 connector for use with ChaseCam remotes and other items that
use the RS-232 interface such as Data Acqusition
Audio/Video Output via a 3.5mm MiniAV jack
DC Power Input Jack (2.1mm DC jack, center positive)
DC input terminal block (older PDR100 units used 4 positions for power out also)
Rear Panel
LED Indicator Table
No Light
= Unit is not powered
Green, Steady
= Unit is on (Standby Mode) and ready to record
Green, Flashing Slowly
= In Standby but not ready to record or low battery. Door could
be open, no card, card is full, no video present, low battery.
Green, Flashing Rapidly
. Playing back recordings. The higher the quality, the faster the
flashing.