CHART MVE TS, Quick Reference Manual, Page: 12 / 23

11
— 21081123 A
MVE TS Quick Reference Guide
Adjusting Liquid Level & Liquid Level Alarm Settings
The following section describes how to adjust liquid nitrogen level settings and the
high/low level alarms. NOTE: Security Level 2 or higher is required to adjust the Level
and Level Alarm settings (See
“Password and Security Setup” section for details).
NOTE: T
o exit any menu screen and return to the previous menu press “<” key.
1.
Press “Setup”
Controller will prompt for a password. Type in the password using the number pad that appears and
press “Enter”.
2.
Press “Liquid Level Settings”