8
Fit the Hose
Place a Hose Clamp over the outside
of one end the Hose.
Push it onto the inlet, on the underside
of the Collector Body.
Use a cross head screw driver to close
the Hose Clamp until it is tight.
The second Hose Clamp can be used
on the other end of the hose to secure
it to a hose fitting or the dust hood of a
machine.
The Extractor is now ready to use.
Using the Extractor
Always start the extractor running before starting the dust producing machinery. Also allow the
extractor to run for 10 seconds after the other machine is switched off to allow dust in the hose
system to clear.
Empty the collection bag before it is overfull and dispose of the waste in accordance with the
current requirements of your local authority.
Please Note: Maximum recommended total hose length in use at any time is 3 metres. Longer
hose lengths may be used, but will reduce the performance.
When using the extractor with machines or power tools which have a smaller diameter connection,
it is recommended to run the 100mm diameter hose from the extractor up to the machines dust
outlet and fit the appropriate sized reducer at that point. This will maintain the airflow rate of the
unit. For some applications it may be more convenient to use a smaller diameter hose. This will
inevitably reduce the performance of the machine and the length of small diameter hose should be
kept to a minimum.
Optional Items
1 Micron Cartridge Filter Upgrade
The standard cloth filter, filters down to 2 microns.
This optional cartridge replaces the cloth bag and filters down to 1
micron without any loss in performance.
Reducers
Used to connect the extractor to power tools or
machinery with outlets smaller than 100mm diameter.
