9
Place one hand wheel on the spindle protruding
from the front of the saw.
Rotate it so that the locking screw is in line with
the flat on the spindle and tighten the screw.
This wheel controls the rise and fall of the blade.
Turn clockwise to raise the blade.
Raise the blade, loosen the nut and bolt in the
crown guard and fit it over the riving knife.
Tighten the black nut so that the guard is
secure.
Fit the second hand wheel to the spindle
protruding from the right hand side of the saw.
This controls the blade angle.
Remove the four screws by the dust extraction
outlet and use them to fix the 100mm hose
connector.
