Rip fence
Mitre fence
Optional Side Extension Table
If you have purchased the optional right hand extension
table;
Bolt the two support braces to the right hand side floor
stand rail. This gives support to the table while you are
attaching it.
Push a bolt through each of the two holes adjacent to the
legs. Place a washer and nut on the back end. Leave
them loose and with a good length of the bolt protruding
on the outside of the table.
Slot the table over the two protruding bolts and support
the outer edge by guiding the braces so that they sit
inside the turned down edge of the extension table, as
shown. Level the extension table to the main table and
tighten all the bolts.
