28
Step 13
Press the two raised points on the
back of the bezel into the
corresponding holes on the side
burner front panel. Then, firmly
seat the valve nozzle into the
burner venturi. Hold in place while
you perform Step 14.
Step 14
Insert the two screws that are
already attached on the side
burner valve through the
corresponding key holes on the
side burner front panel and bezel,
from the back of the side burner
front panel. Depending on the side
burner valve, you will be using
either the outside key holes (Figure
1), or the inside key holes (Figure
2). Pull the valve upward or
downward to lock into place. Then
tighten the two screws.
WARNING: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
Step 15
Install the side burner control knob
onto valve stem.
Bezel
Side
Burner
Valve
Burner Venturi
Valve
Nozzle
Side
Burner
Control
Knob
Side Table Holes
Figure 1
Figure 2
Summary of Contents for 810-7450-s
Page 32: ...31 Charmglow 7450 Assembled ...
Page 63: ...62 Charmglow 7450 Armada ...
