Charmate Corona CM155-028, Instructions Manual

Page: 5 / 8

5 4
Step 1
Attach the lid handle (1) using two washers (H). Attach the lid
hanger (4) to the lid (3), using two washers (B) and wing nuts (F).
Step 2
Attach the air vent (17) in the air hole of the lid (3) using nut
(E), washer (D) and screw (C).
Assembly Instructions
Step 3
Attach the body handle (I) to the fire bowl (8) using two
washers (B) & (H) and wing nuts (F). Ensure larger washers
(H) are on the outside.
Step 4
Attach the ash door (E) to the bottom of the fire bowl (8)
using three screws (C) and nuts (E).
Step 5
Insert leg caps (10) on the wheel legs (15) and straight legs (11),
and attach them to the fire bowl (8) bottom one by one, using
two screws (A), washers (B) and wing nuts (F) for each leg.
Step 6
Locate the wire rack (13) inside the legs, ensuring the wider
prongs are located through the holes in the short legs, then
insert the wheels (14) and secure with washers (G) and screw
caps (18) on both sides.
Step 7
Locate the other end of the wire rack through the holes in
the long legs and secure with a washer (D) and wing nut (F)
each side.
Step 8
Tighten all the screws and nuts.
Step 9
Place the charcoal grate (6) into the fire bowl, and place the
cooking grill (5). Locate the tool hooks (16) on the side of the
fire bowl. Add the charcoal baskets (7) if required.