Charlton & Jenrick Paragon P3, Owner'S Manual

Page: 11 / 28

www.charltonandjenrick.co.uk 11 LT7272 (ISS 1)
SECTION FOUR Important Information (user instructions)
The only user removable parts are: -

The loose coals.

The base and front coal matrixes

Cast Fret

Decorative Trim

Glass Canopy

Flue Adaptor

LH & RH Canopy Liner

Canopy Fixing Brk

Fascia Assembly
Like all appliances incorporating an aerated burner a low frequency noise may be heard, particularly on the low
setting, this is quite normal and does not affect the operation of the appliance.
Servicing
It is advised that the PARAGON P3 fire is serviced annually this is more likely to provide trouble-free operation. A
competent person must carry this out, i.e. Gas Safe Registered Installer in accordance with the current Gas Safety
(Installation and Use) Regulations 1998 (as amended).
The chimney or flue should be checked annually to ensure clearance of combustion products.
Ventilation in the Great Britain
GB (Great Britain) This fire does not normally require purpose build ventilation in accordance with 2010 document
“J” Building Regulations.
Ventilation in the Republic of Ireland
Must be permanent ventilation and must comply with the rules in force and should be checked periodically to
ensure freedom from obstruction.
General Appliance Care
Any debris from the chimney or flue should be removed from the fuel bed. The fire should be allowed to cool for three
to four hours before removing debris.
Rubbish must not be thrown onto the fuel bed under any circumstances.
The cast fire front must be positioned in front of the fire whilst it is burning.