background image

Unit 17. Millbrook Business Park, Sybron Way • Crowborough, East Sussex TN6 3JZ United Kingdom

Phone: 00 44 (0) 1892-665313 • Internet: 

Charleswater.co.uk

PPE-5105.E

 Page 4 of 4

© 2013 Charleswater

Limited Warranty

Charleswater expressly warrants that for a period of one (1) year from the date of purchase, Charleswater Low Resistance Testers will 

be free of defects in material (parts) and workmanship (labor). Within the warranty period, the product will be tested, repaired or replaced 

at Charleswater’s option, free of charge. Call Customer Service at 00 44 (0) 1892-665313 for a Return Material Authorisation (RMA) and 

for proper shipping instructions and address.  You should include a copy of your original packing slip, invoice, or other proof of purchase 

date.  Any unit under warranty should be shipped prepaid to the Charleswater factory. Warranty replacements will take approximately 

two weeks.

Warranty Exclusions

THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED 

AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE 

SPECIFICALLY DISCLAIMED. The express warranty will not apply to defects or damage due to accidents, neglect, misuse, 

alterations, operator error, or failure to properly maintain, clean or repair products.

Limit of Liability

In no event will Charleswater or any seller be responsible or liable for any inury, loss or damage, direct or consequential, 

arising out of the use of or the inability to use the product. Before using, users shall determine the suitability of the product for 

their intended use, and users assume all risk and liability whatsoever in connection therewith.

Summary of Contents for 99036

Page 1: ...ering and desoldering equipment the measurement techniques can be used for other electrical hand tools The working part of AC powered tools should be capable of providing a conductive path to ground New powered hand tools such as soldering irons typically should have a tip to ground resistance of less than 1 0 ohm NOTE This resistance may increase with use but should be less than 20 0 ohms for ver...

Page 2: ...and the PASS LED does not illuminate Example of Test Range Uses 1 OHM Range ESD Technical element Grounding Conductors Banana Jacks Common Ground Points Earth Bonding Points Grounding Blocks Mat Ground Cords ANSI ESD S6 1 Grounding sections 6 4 Technical Elements 6 4 1 6 4 2 and 6 4 3 New AC Powered Hand Tools ESD Handbook ESD TR20 20 section 5 5 2 2 Electrical Hand Tools 2 OHM Soldering Irons ESD...

Page 3: ...ire 2 Set the Low Resistance Tester to the 1 ohm test setting 3 Attach the lead of a 1 ohm resistor to the alligator clip 4 Firmly place the tester s probe tip on the opposite resistor lead 5 Press and hold the test button The PASS LED should illuminate 6 Repeat the procedure with a 1 2 ohm resistor The PASS LED should not illuminate 7 Repeat this process with the ranges listed in the table below ...

Page 4: ... proof of purchase date Any unit under warranty should be shipped prepaid to the Charleswater factory Warranty replacements will take approximately two weeks Warranty Exclusions THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES EXPRESSED AND IMPLIED INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED The express warranty wil...

Reviews: