Charles Machine Works Ditch Witch RT125, Operator'S Manual

Page: 48 / 231

RT125 Operator’s Manual
Controls - 47
Graphic Display
Display Pop-Up Messages
Machine display will automatically display pop-up messages for start interlock and exhaust cleaning
systems when needed. Display screen will return to normal once conditions are met.
Start Interlock
For machine to start, operator must be in seat and ground drive direction control must be in neutral. If one
or more of these conditions is not met, a pop-up message will appear with applicable information about
which condition is not met.
Exhaust Cleaning
A pop-up message will appear when an exhaust cleaning is needed.
When pop-up message appears:
1. Ensure machine is away from combustible material.
2. Set parking brake.
3. Set engine at low throttle.
4. Follow on-screen prompts to initiate exhaust cleaning.
After exhaust cleaning is initiated, another pop-up message will be displayed with the estimated time
remaining until process is complete.
Air Filter
A pop-up message will appear when the air filter needs to be changed. See “Change Air Filter” on
page 187 for more information on how to change air filter.
NOTICE: Failure to complete the exhaust cleaning when required can cause damage to the engine.
IMPORTANT: If exhaust cleaning cannot be initiated when pop-up message occurs, follow on-screen
prompts to return to main screen (gauges). Pop-up message will return to prompt exhaust cleaning at a
later time.
NOTICE: Failure to change the air filter when required can cause damage to the engine.