7
4
4. Slide the handlebars so they
are tight against the bike stem.
5. While holding the bars against
the stem, place the faceplate
on the opposite side of the
handlebars and loosely thread
the four, 4mm bolts into the four
holes on the stem (two above
the handlebars and two below).
6. Move to the back of the bike and
slide the cardboard wheel block
off the rear wheel, then put the
kickstand down.
7. Move to the front of the bike and
remove the cardboard shroud
from around the front of the bike.
The kickstand will keep the bike
from falling over.
5
6
7
Summary of Contents for COMFORT 2
Page 1: ...Quickstartguide COMFORT2...
