-3-
Do not exceed the maximum values specified in the applicable
standards.
If you have any problem, contact your local CHARDER MEDICAL service
partner.
ELECTROMAGNETIC COMPATIBILITY
ADVICE TO THE USER
This product is a sensitive electronic instrument and as such it may
temporarily be affected by Radio Transmitting Devices being used in close
proximity to it (such as Mobile Phones, Walkie Talkies, CB Radios, and
Radio Model Controllers). If it does exhibit symptoms such as the display
of erratic or erroneous data, try moving this product away from the source
of interference or switching off that source of interference whilst you are
using this product. If the problem persists then contact your local agent.
WARRANTY-LIABILITY
If a fault or defect is present on receipt of the unit which is within
CHARDER MEDICAL’s scope of responsibility, CHARDER shall
have the right to either repair the fault or supply a replacement unit.
Replaced parts shall be the property of CHARDER. Should the fault
repairs or replacement delivery not be successful, the statutory
provisions shall be valid. The period of warranty shall be two years,
beginning on the date of purchase. Please retain your receipt as
proof of purchase. Should your scale require servicing, please
contact your dealer or CHARDER MEDICAL Customer Service.
No responsibility shall be accepted for damage caused through
any of the following reasons: Unsuitable or improper storage or use,
-28-
2.
Indicator showing “
0000” ZERO SPAN
out of range
Incorrect weighing result - Avoid damages by external environment
force such as free-drop to the ground, collision by external objects,
etc.
Proper re-calibration procedure required to correct the setting of
weighing accuracy.
Interference due to RF disturbance, ground vibration
…
etc.
Unstable platform feet adjustments according to bubble level
indication
Incorrect position or other external objects within weighing area
The weighing-scale is not put in a solid & firm ground area, such as
carpet floor or lawn.
3. Connection failure for data transmission to PC or printer
Wrong connection wires or faulty wires for transmission between
the digital indicator & load cells.
Wrong indicator models
Wrong internal wiring or wire broken
In case of the following defective mode occurs, it is suggested to contact
your nearest Authorized Dealer for further technician service & repair:
1.
Power Switch-on failure :
Push-button faulty
Short circuit wires - Wire broken
Safety fuse burnt out
Wire connection problem
Main power adaptor faulty – Parts Replacement