background image

7

DANGER

* Improper use of the grounded plug can result in the risk of electrical shock. If the

power cord is damaged please call our customer service.

1. This unit should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to
minimize the possibility of electric shock.

2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under

any circumstances, cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician.

3. This appliance requires a standard 110~120 volt, 60Hz electrical outlet with three-prong

ground.

Before using your ice maker, it is strongly recommended to clean it thoroughly.

1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. Then use the water to rinse the inside parts, and drain out the water by unplugging the

drain cap on the side.

4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and

warm water.

5. Dry the interior and exterior with a soft cloth.
6. When the machine is not in use, open water drained cap to drain water completely from

water reservoir.

CONNECTING YOUR ICE MAKER

CLEANING AND MAINTAINING YOUR ICE MAKER

Summary of Contents for HZB-15/BF












Reviews: