Chard DF-3E, Care And Use Manual

Page: 4 / 12

ASSEMBLY INSTRUCTIONS
GENERAL INFORMATION
Intended Use
This device is used for deep-frying food. It is intended exclusively for this purpose
and may only be used as such. It may only be used in the manner described in
these instructions. The device must not be used for commercial purposes. Any
other use of this device is considered to be contrary to the intended use and may
result in damage to materials or even personal injury.
Chard International LLC does not accept any liability for damage caused as a
result of the use of this device contrary to its intended use.
Electrical Connection
• The magnetic power cord should only be inserted into a standard 120 volt
electrical outlet.
• Plug directly into standard electrical outlet. DO NOT use an extension cord.
Before Using For The First Time
1. Remove the packaging. Then take the LID off the deep fat fryer. In the deep
fat fryer you will find a FRYING BASKET. Take all objects out of the FRYER
BASKET.
2. It is highly recommended to clean the LID, HOUSING, TANK and FRYING
BASKET as described in the “Cleaning” section.
3. Please pull the magnetic power cord out of the cord compartment.
Fryer Basket Assembly:
1. Squeeze the handle slightly and insert both bent ends into the lower tab
openings.
2. Tilt the handle back and lock into place. The handle will snap firmly into place.
FIGURE 1
2