How to Use:
TIP:
Partially frozen food grinds much more efficiently than fully thawed food. We
recommend that frozen food be partially thawed before grinding or thawed food
be partially frozen prior to grinding. Never attempt to grind fully frozen food.
1. After unit is fully assembled per instructions above, confirm that power switch
is in the OFF position (OFF is the center “O” position.)
2. Insert plug into wall outlet.
3. Confirm grinder is on stable work surface.
4. Place a wide shallow bowl or plate directly below the grinder head.
5. Turn power switch to “R” right position. The grinder must always be in the ON
position before adding food.
6. Place food to be ground into hopper and use pusher to push food through
opening.
Note: Reverse Switch
7. If food becomes jammed, turn the switch to the OFF position. To clear
jam, turn the switch to “L” left position to reverse the auger action until food is
cleared. Disassembly may be required to clear jam.
Note:
Always unplug cord from outlet before disassembling.
TIP:
Never attempt to grind bone or other solid objects as this will cause
permanent damage to the grinder.
TIP:
If the ground meat is not discharging smoothly check to see if the screw ring
is too tight. Readjust as needed. Also check to see if the discharge plate is blocked
and needs to be cleaned. If blades are dull and not cutting smoothly, they may be
ground sharp or replaced. Contact Chard customer service.
HOW TO USE
4
Summary of Contents for 8 Pro-Power Grinder
Page 7: ...6...
