OM2727 A.2
™ & © Char-Griller / A&J Mfg.
7
ASSEMBLY INSTRUCTIONS
Read all safety warnings and instructions carefully before
assembling and operating your grill.
IMPORTANT NOTE: DO NOT TIGHTEN ANY NUTS AND BOLTS UNTIL
GRILL IS FULLY ASSEMBLED.
Step 1: Assemble Long Legs, Short Legs, and Leg Braces as show below then secure the Leg
Braces to one set of Long Leg and Short Leg with 4 Hex Bolts and four 4 Hex Nuts.
Long Legs
Short Legs
Leg Braces
Hex Nuts
1 3/4” Hex Bolts
1 3/4” Hex Bolts
Step 2: Install Bottom Wire Shelf by placing the four corner hooks inside the hole on each leg
then rotate the leg assemblies up and secure the Leg Braces to the other side of the Long Leg
and Short Leg set.
Hex Bolts
Bottom Wire Shelf
1 3/4” Hex Bolts
Leg Braces
1 3/4” Hex Bolts
