B-7
Step 9
Position O-Ring on bottom of damper by rolling it up to the bead. With O-Ring in position, install
DAMPER with two (2) 1/2 inch bolts from inside the HOOD. Damper coating will scratch with use.
This does not affect the function or performance of the damper. Next, install THERMOMETER
GASKET, THERMOMETER, and BEZEL with wing nut, as shown below.
Damper
Hex Bolt
O-Ring
Bezel
Thermometer
Thermometer
Gasket
Step 10
Install: FIRE BOWL, FIRE GRATE, COOKING GRATES and WARMING RACK inside of the
lower body.
NOTE: Heat Gauge:
This heat gauge is accurate to +/- 10% of
the actual temperature. We suggest verify-
ing this with your oven. You will not be able
to adjust / calibrate the AKORN heat gauge,
but you will be knowledgeable as to its de-
gree of accuracy.
If you require precise temperature control,
we recommend using a digital meat ther-
mometer.
Summary of Contents for AKORN 16820
