OM1515 B.2
™ & © Char-Griller / A&J Mfg.
5
ASSEMBLY INSTRUCTIONS
–
GRILL WITH FULL CART
Read all safety warnings and instructions carefully before
assembling and operating your grill.
IMPORTANT HINT: DO NOT TIGHTEN ANY NUTS AND BOLTS UNTIL
GRILL IS FULLY ASSEMBLED.
Remove and unwrap the Patio pro and all of its parts from the packaging. Also
remove the ash drawer from the Patio Pro. Place GRILL on its end with damper
opening facing up. Spread if open in order to reach inside to perform the follow-
ing.
Step 1: Insert SHORT LEGS and LONG LEGS into each end of LEG CROSS BARS,
then attached with 1 3/4” hex bolt and nut, See below. (CAUTION: The holes direction
on the LEG CROSS BARS are very critical for later assembly step so follow illustration
below carefully.)
(4) Hex Nut
(4) 1 3/4” Hex Bolts
FRONT SIDE
OF GRILL
Long Legs
Short Leg
Leg Cross Bar
Hex Bolt
BACK SIDE
OF GRILL
Leg Cross Bar
hole direction.
Leg Cross Bar
hole direction.
Short Leg