Hinge Pin
and Hitch Pin
Qty: 2
Qty: 2
Qty:2
Qty: 2
463732004
Items to Assemble:
1 V-Bar
1 Grate
Items to Assemble:
2 Wheel Assemblies
2 Hitch Pins
2 Leg Extenders
Items to Assemble:
2 Leg Assemblies
1 Bottom Shelf
6 Carriage Bolts
6 Wing Nuts
Qty: 6
Qty: 6
Place Bottom Shelf and Legs as shown.
After assembling tighten all Wing Nuts.
Right Side:
Attach 2 Carriage Bolts and Wing Nuts in
front and back.
Left Side:
Place 1 Carriage Bolt
and Wing Nut in
upper hole only
Items to Assemble:
1 Grill Bottom
1 Heat Shield
2 Carriage Bolts
2 Wing Nuts
2 Control Knobs
Items to Assemble:
1 Condiment Basket
Items to Assemble:
1 Right Shelf
4 Wing Screws
Qty: 4
Items to Assemble:
2 End Caps
1 Toolholder
1 Carriage Bolt
1 Wing Nut
Place Carriage Bolt in right hole on Toolholder. Secure with Wing Nut.
Items to Assemble:
1 Sideburner Body
1 Sideburner Frame
1 Carriage Bolt
1 Wing Nut
1 Crown Screw or Wing Nut
Join Sideburner Body and Frame. In back center hole attach with Carriage Bolt and Wing Nut.
In front use a Crown Screw or Wing Nut to attach Toolholder and Sideburner Body.
Qty: 1
Qty: 1
Qty: 1
A
Items to Assemble:
1 Sideburner
1 Wing Nut
1 Sideburner Valve Cup
1 Sideburner Knob
1 Sideburner Grate
A
B
C
Place Sideburner into hole.
Attach Sideburner Valve Cup. Make sure
Sideburner Tube is inside of valve. Tighten
with Wing Nut.
Place Sideburner Knob and Grate
Correctly assembled Sideburner Tube in Valve
B
C
Attach long wire from beneath console
to electrode beneath Sideburner.
D
D
Items to Assemble:
1 Grill Lid
2 Hinge Pins
2 Hitch Pins
1 Handle
2 Wing Nuts
1 Logo Plate
Item to Assemble:
1 Wire Shelf
1 Panel
2 Push Pins
Qty: 2
A
B
Place Wire Shelf in 3rd hole from top.
Assemble front panel by placing
tabs into slots on Bottom Shelf.
Attach with push pins.
A
B
Push V-Bar down onto rest
in Grill Bottom
Grate rest
Items to Assemble:
1 Lower Warming Rack
1 Upper Warming Rack
A
B
Insert pivot wire of Lower Warming Rack into Lid.
Flex leg wires to insert into Grill bottom.
Insert pivot wire of Upper Warming Rack into lid.
Flex leg wires to insert into loops on Lower Rack.
Leg wires on both Warming Racks
must run underneath surfaces.
Legs snap into loop
B
A
Qty. 2
Qty.2
Attach Wheels with Hitch Pins
Qty: 1
Qty: 1
or
Qty: 1
1
9
12
11
10
9
8
4
5
6
7
1
2
3
