4644450-04
11
Ignitor Lighting
s
Do not lean over Barbecue while lighting.
1.
Open lid.
Turn on gas at fuel bottle.
2. Push in and turn knob on control leg to HIGH.
3. Push IGNITOR button rapidly to light. Be sure burner lights
and stays lit.
4. If IGNITOR does not work, follow match lighting
instructions
.
Match Lighting
s
Do not lean over Barbecue while lighting.
1.
Open lid.
Turn gas on at fuel bottle.
2. Place lit long-stem match into one of
three large match lighting holes around
burner tube from beneath Barbecue.
3. Push in and turn control knob to HIGH.
Be sure burner lights and stays lit.
Burner Flame Check
1.
Light burner in Barbecue bottom using long-stem match as
described in
Match Lighting.
2.
Push in and rotate knob from
HIGH
to
LOW
. You should see
a noticeably smaller flame in
LOW
position from that seen in
HIGH
position.
Always check flame, as described above,
prior to each use.
Use & Care
If burner does not light turn knob to OFF, wait 5 minutes,
try again. If the burner does not ignite with valve open, gas
will continue to flow out of the burner and could accidently
ignite with risk of injury.
Match lighting holes
Turning Barbecue Off
Turn knob to OFF position.
Ignitor Check
Turn gas off at Fuel Bottle.
Press ignitor button rapidly.
"Click" should be heard each time at electrode. See
Troubleshooting if no click is heard.
Valve Check
Important: Make sure gas is OFF at Fuel bottle before
checking valve.
Knob locks in place. To check valve, first
push in knob and release, knob should spring back. If knob
Clean burner twice a month when in regular use.
Clean burner prior to use after storage. Spiders
and insects like to build nests in burner tube
(especially during colder months). These nests
can cause flashback (fire in burner tube).
Typical spider web inside burner
does not spring back, replace valve assembly before using
Barbecue. Turn knob to LOW position then turn back to OFF
position. Valve should turn smoothly.
Hose Check
Before each use, check to see if hose is cut or worn. Replace
damaged hose before using Barbecue. Use only valve/hose/
regulator specified by manufacturer.
General Barbecue Cleaning
Clean porcelain Barbecue lid and bottom with soap and
water or nonabrasive cleaner to remove dust and grease. Use
Creme of Tartar for stubborn stains. Do not use a Barbecue
cleaner on outside of Barbecue. Wipe with vinegar.
Do not
paint inside of Barbecue.
Replace ceramic briquets as frequently as necessary to avoid
grease buildup and flare-ups.
Porcelain grill:
Because of glass-like composition, most
residue can be wiped away with baking soda/water solution
or specially formulated cleaner. Use nonabrasive scouring
powder for stubborn stains.
Repainting Your Barbecue
After extended use and exposure to weather, paint on
Barbecue
legs may deteriorate or become spotted. Although this
detracts from Barbecue's appearance, it will not impair its
performance.
To refinish Barbecue legs, use wire brush and lightly sand
with fine
grit sandpaper. Sanding allows new paint to adhere more
easily. Refinish legs with heat-resistant paint.
Storing Your Barbecue
Clean cooking grill.
Apply a light coating of vegetable oil to heat plate.
Store in dry location.
When fuel bottle is connected to Barbecue, store both
outdoors in well-ventilated space and out of reach of children.
Store Barbecue indoors ONLY if fuel bottle is disconnected,
removed from Barbecue and stored outdoors.
Cover Barbecue if stored outdoors. Choose from a variety of
Barbecue covers offered by manufacturer.
All manuals and user guides at all-guides.com
all-guides.com
