5
ASSEMBLY GUIDE
Part
Qty
.
GRILL CART Assembly
A6
– Cart Bracket
1
Step 3 -
Carefully turn the
Cart Assembly
over
and allow it to rest on the tops of the leg
assemblies. Spread the leg assemblies apart just far
enough to allow the insertion of the
Wire Shelf
(A7)
into the 4 leg holes. Assemble the
Cart
Bracket (A6)
to the
Cart Assembly
by inserting 4
each
1/4-20x2" screws
int0 into corresponding
holes as shown. Allow the
Cart Bracket
to rest on
the floor, this will help with alignment. Secure
with 4 each,
1/4-20 nuts
using a small adjustable
wrench, not supplied.
FINGER TIGHTEN ONLY
AT THIS POINT.
The bracket will be tightened in
step B2.
Be sure to install
Cart Bracket (A6)
on the side
shown. Once complete -leave the cart in the
upside down position.
Lastly, insert the
Leg End Caps (A8)
into the front
1/4-20x2"
screws
Place the Grill Bottom on the carton pad upside
down in preparation for the next step.
A7
1
Wire Shelf
–
A8
#10x3/8"
screws
A8
– Leg End Cap
2
Fasteners
1/4x20-2"
1/4-20 Nut
(qty 4)
screw
1/4-20 Nut
(qty 4)
#10x3/8"
(qty 2)
screw
A7
A6
A7
A6
Visit
www.charbroil.com/live
