background image

Natural Gas Conversion Kit •

• 09/29/07

3496258

NATURAL GAS

CONVERSION KIT

FOR OUTDOOR USE ONLY

This Natural Gas Conversion Kit can be used ONLY with

Dual Fuel™ grills.

Model # 4984619

For use with Commercial Series Dual Fuel™ Grills only.

DANGER

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the

appliance and immediately call your gas
supplier or your fire department.

INSTALLER/ASSEMBLER:

WARNING

CALIFORNIA PROPOSITION 65

1. Combustion by-products produced when using

this product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.

2. This product contains chemicals, including lead

and lead compounds, known to the State of
California to cause cancer, birth defects or
other reproductive harm.

Wash your hands after handling this product.

WARNING

CAUTION

1. Failure to follow all manufacturer’s instructions could

result in serious personal injury and/or property
damage.

2. Grill installation must conform with local codes,

regulations or in their absence with National Fuel
Gas Code, NFPA 54/ANSI Z223.1 (In Canada must
conform to CSA B 149.1).

1. Read and follow all safety statements, assembly

instructions, and use and care directions before
attempting to assemble and cook.

2. Some parts may contain sharp edges-especially as

noted in the manual! Wear protective gloves if
necessary.

CONSUMER:

Keep this manual for future reference.

Leave this manual with consumer.

If you have questions or need assistance during assembly, please call

1-800-241-7548 (USA) or 1-800-387-6057 (Canada)

To insure your satisfaction and for follow-up service,

register your grill online at www.grillregistration.com

Summary of Contents for Commercial 4984619





















Reviews: