Char-Broil Commercial 463248208 Product Manual Download Page 30

LIMITED WARRANTY

Manufacturer warrants to the original consumer-purchaser only that this product shall be free from defects in workmanship and materials after 

correct assembly and under normal and reasonable home use for the periods indicated below beginning on the date of purchase.

The manufacturer reserves the right to require that defective parts be returned, postage and or freight pre-paid, by the consumer, for review and 

examination.

Limited Lifetime Stainless Steel Burners

Firebox and lid - 2 years

Remaining parts - 1 year

Upon consumer supplying proof of purchase as provided herein, Manufacturer will repair or replace the parts listed below which are proven 

defective during the applicable warranty period. Parts required to complete such repair or replacement shall be free of charge to you except for 
shipping costs.

 The original consumer-purchaser will be responsible for all shipping charges of parts replaced under the terms of this 

limited warranty.

This limited warranty is applicable in the United States and Canada only, is only available to the original owner of the product and is not 

transferable. Manufacturer requires reasonable proof of your date of purchase. Therefore, you should retain your sales slip or invoice and register 
your new product immediately. Defective or missing parts subject to this limited warranty will not be replaced without registration or proof of purchase. 
Register online at http://www.charbroil.com or complete and return via mail the Product Registration Card located on the last page of the Use & Care 
manual included with this product and retain your sales receipt for proof of purchase.

This limited warranty applies to the functionality of the product ONLY and does not cover cosmetic issues such as scratches, dents, corrosions 

or discoloring by heat, abrasive and chemical cleaners or any tools used in the assembly or installation of the appliance, surface rust, or the 
discoloration of stainless steel surfaces.

This limited warranty will not reimburse you for the cost of any inconvenience, food, personal injury or property damage.
If an original replacement part is not available, a comparable replacement part will be sent. You will be responsible for all shipping charges of 

parts replaced under the terms of this limited warranty.

ITEMS MANUFACTURER WILL NOT PAY FOR:

1. Service calls to your home.
2. Repairs when your product is used for other than normal, single-family household or residential use.
3.  Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with 

electrical or plumbing codes, or use of products not approved by the manufacturer.

4. Any food loss due to product failures.
5. Replacement parts or repair labor costs for units operated outside the United States or Canada. 
6. Pickup and delivery of your product.
7. Repairs to parts or systems resulting from unauthorized modifications made to the product.
8. The removal and/or reinstallation of your product.
9. Shipping cost, standard or expedited, for warranty and replacement parts.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

Repair or replacement of defect parts is your exclusive remedy under the terms of this limited warranty. Manufacturer will not be responsible for 

any consequential or incidental damages arising from the breach of either this limited warranty or any applicable warranty, or for failure or damage 
resulting from acts of God, improper care and maintenance, grease fire, accident, alteration, replacement of parts by anyone other than 
Manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather, acts of nature, animal tampering), improper 
installation or installation not in accordance with local codes or printed manufacturer instructions.

THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER. NO PRODUCT PERFORMANCE 

SPECIFICATION OR DESCRIPTION WHEREVER APPEARING IS WARRANTED BY MANUFACTURER EXCEPT TO THE EXTENT SET FORTH 
IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY STATE, INCLUDING IMPLIED 
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY LIMITED IN DURATION TO THE 
DURATION OF THIS LIMITED WARRANTY.

Neither dealers nor the retail establishment selling this product has any authority to make any additional warranties or to promise 

remedies in addition to or inconsistent with those stated above.

Manufacturer’s maximum liability, in any event, shall not exceed the documented purchase price of the product paid by the original consumer. 

This warranty only applies to units purchased from an authorized retailer and or re-seller.

NOTE: Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above limitations or 

exclusions may not apply to you. This limited warranty gives you specific legal rights as set for herein. You may also have other rights which vary 
from state to state. In the state of California only, if refinishing or replacement of the product is not commercially practicable, the retailer selling this 
product or the Manufacturer will refund the purchase price paid for the product, less the amount directly attributable to use by the original consumer-
purchaser prior to discovery of the nonconformity. In addition, in the state of California only, you may take the product to the retail establishment 
selling this product in order to obtain performance under this limited warranty.

If you wish to obtain performance of any obligation under this limited warranty, you should write to:

Char-Broil Consumer Relations

P. O. Box 1240

Columbus, GA 31902-1240

Consumer returns will not be accepted unless a valid Return Authorization is first acquired by calling 1-888-430-7870 and then clearly marked 

on the outside of the package and the package is shipped freight/postage pre-paid to the address above.

30 • 463248208    

Summary of Contents for Commercial 463248208

































Reviews: