Char-Broil Cast Iron, User Manual, Page: 4 / 8

1
2
Attach the two side panels to the base using
1/4-20x3/4”
hex-head screws and
1/4-20
flange nuts. Base rests on
supports at each side panel.
NOTE: Screws and nuts should be left very loose (see inset below). They will be
fully tightened after the hood is assembled in Step 3.
1/4-20
flange nut
Qty: 8
1/4-20x3/4”
hex-head screw
Qty: 8
Side panel
55700550
Base
55700549
1/4-20x3/4”
hex-head screw
1/4-20
flange
nut
Attach the door supports to the side panels
with
#10-24x1/4”
machine screws.
#10-24x1/4”
machine screw
Qty: 8
Door support
(left front - right rear)
55700551
Door support
(right front - left rear)
55700552
#10-24x1/4”
machine screw
Leave screws
very loose
until hood
is assembled.
Base
Side panel leg