10
473620408 • 17
#10-24x1/2”
Machine Screw
Qty: 2
Qty. 2
#10-24
Wing Nut
Warning: Make sure heat shield is placed above the
two venturis, or else it drops down and may fail to
protect tank from being overheated.
Heat
Shield
Venturi T
ube
9
A
Place firebox on cart. Attach with
#10-24x2" machine screws, fiber washers
and
#10-24 wing nuts
.
B
Place burner assembly into firebox. Make sure venturi tubes and valves are correctly engaged. If burner is not
leveled from left to right, adjust the two screws attaching valve to control panel in Step 8. Attach burner
assembly to firebox with
fiber washers
and
#8 sheet metal screws
.
C
Insert #10-24x1-1/4" screws into each side of firebox as shown. Inside firebox attach fiber washers and
flanged nuts to screws.
D
Push control knobs onto valve stems.
E
Connect ignitor wire to electrode terminal on burner.
D
A
Ignitor Wire
E
Correctly assembled
burner tube
valve in
Qty: 4
#10-24x2”
Machine Screw
Qty: 14
Fiber Washer
Qty.4
#10-24
Wing Nut
Qty: 2
#8 Sheet Metal Screw
Qty: 4
#10-24x1-1/4”
Machine Screw
Qty: 4
#10-24
Flange Nut
B
C
Fiber Washer
#8 Sheet Metal Screw
10
Attach heat shield to left upper bracket using
#10-24x1/2" machine screws and #10-24 wing nuts.
Fiber Washer
Flange Nut
