9
18
Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger
center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using screws
and lock washers that were removed from bracket, shown A.
Attach sideburner bezel to fascia using two
#8-32x3/8”
fascia.
Place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
B.
Press sideburner control knob onto valve stem, shown
valve stem
#8-32x3/8”
4mm Lock
washer
screw
B
Note: Make sure set the Bezel with
longer slot at the top.
Sideburner Bezel
Control Knob
Valve bracket
A
Sideburner shelf Fascia
Sideburner shelf
Screws and washers
removed from
valve bracket
First, remove the two screws and lock washers factory attached to the sideburner valve bracket.
screws and 4mm lock washers.
Note: Use left and right holes
on fascia to attach valve bracket
Note: Use upper and lower holes
on fascia to attach bezel
Summary of Contents for 463250510
Page 26: ...NOTES 26 ...
Page 27: ...Warranty Registration Department P O Box 1240 Columbus GA 31902 1240 27 ...
Page 28: ......
