22
10
Place left side shelf to the left side of firebox (A).
Tighten the pre-installed screws to the left side shelf (B).
Remove the nut from injecter, insert the injecter to the hole on the sideburner brace, re-install and tighten the nut to fix the injecter to
sideburner brace (C).
Remove the screws, lock washers and flat washers from sideburner. Place sideburner into shelf. Make sure injecter is inside
sideburner tube. Attach sideburner to drip pan with the screws, lock washers and flat washers removed from sideburner previously.
Attach sideburner ignitor wire to the electronic ignition module through the hole of the left plate of control panel (D).
Place grate onto sideburner shelf (E).
Sideburner Ignitor Wire
Electronic Ignition Module
A
Left Side Shelf
B
Tighten the
pre-installed
screws
Injecter
C
Sideburner Brace
Nut
D
Sideburner Ignitor Wire
Sideburner Tube
E
Sideburner
Grate
