Step 5 -
With Grill Lid open, place the
Cooking Grate
(C1) into the
Lower Body
, allowing it to
rest on the three brackets spaced around the
Lower Body
. Be sure the notch in the cooking grate
is facing the front of the grill. Place the
Warming Rack
(C2) on to position by first hooking the
center pin into the hole in the wind shield, then rotate the warming rack down into position, with
other pins secured in the slots.
Step 6 -
With Grill Lid open, install the
Handle
(C3)to the lid. Insert 2 10-24x3/8” screws from inside
the lid through the lid holes, and into the handle. Repeat for other side - tighten securely. Install
Grease Tray
(C4) by sliding the tray onto the Grease tray rails from the side of the grill.
4
6
ASSEMBLY GUIDE
GRILL FINAL Assembly
Part
Qty
.
C1
–
1
C2
–
Cooking Grate
1
C3
–
Warming Rack
1
Grease tray
Notch to the
front of grill
C4
C1
10-24x3/8” screws
C3
C2
Handle
1
C4
–
Fiber washers
(qty 2)
Fiber Washer
Fasteners
10-24x3/8"
(qty 2)
screw
NOTE:
The
Cooking Grate
may have sharp edges. Be very
careful when handling the
Cooking Grate.
You should
wear gloves when handling the
Cooking Grate
.
