ASSEMBLY
6
ASSEMBLY GUIDE
Part
Qty
.
B1
– Lower Body
1
B2
– Wind Shield
1
B3
– Grill Lid
1
GRILL BODY Assembly
Step 1
- Attach the
Lower Body Assembly (B1)
to the
Cart Assembly
by aligning the studs on the bottom of the
grill with the corresponding holes in the tops of the leg
assemblies. Secure with 7 each
10-24 nuts
. A Nut Driver
(not supplied) will work nicely for this step.
Step 4 -
Attach the
Grill Lid (B3)
by aligning the hinge holes
in the lid to the matching holes in the
Wind Shield (B2).
Insert 2
Hinge Screws
into the holes and secure with 2
1/4-20 nuts
and
two
Fiber washers
from the inside of the grill.
10-24
Nuts
(3 each)
10-24x3/8"
Screws
(3 each)
Fiber
Washer
(3 each)
Step 3 -
Attach the
Wind Shield (B2)
to the
Lower Body (B1)
by aligning the holes in the panels with the corresponding holes in
the
Lower Body
. Secure with 3
10-24 nuts,
3
10-24x3/8" Screws
,
and 3
fiber washers
. The
Wind Shield
will rest inside the
Lower
Body.
B2
B1
B3
B1
Studs
located on
Lower
Body
Assembly
Fiber
Washer
(2 each)
(qty 5)
Fiber Washer
(qty 10)
Fasteners
10-24x3/8"
(qty 3)
screw
10-24 Nut
(qty 2)
Hinge
(qty 2)
1/4-20 Nut
screw
Hinge
Screws
(2 each)
1/4-20x3/4"
1/4-20
Nuts
(2 each)
1/4-20x3/4"
Step 2
-
With the legs assembled to the
Lower
Body,
tighten the 4 screws holding the
Cart
Bracket
in place. Once complete, turn the grill over
to the upright position.
Visit
www.sizzleonthegrill.com/user-forums
to chat with Patio Bistro
®
owners just like you!
B1
Cart
Bracket
