Page 7
Attachment
Before Attaching the Machine
Before attachment, ALWAYS ensure the following:
- All safety guards & decals are in good working order and correctly fitted
- Lubrication points have been lubricated as per scheduled maintenance period
- The tyres are free of damage and inflated to the correct pressure
- Electrical connections are free of dirt and moisture
Attaching the Machine
NOTE: This machine is designed to attach to the towing vehicle through a 50mm diameter ball hitch.
1.
Reverse the towing vehicle up to the machine.
2.
Attach the machine onto the towing vehicle’s
coupling.
3. Attach the power cable to the control socket fitted on the towing machine, ensuring a secure connection.
WARNING: ENSURE CONTROL EQUIPMENT IS SECURELY ATTACHED TO THE TOWING VEHICLE BEFORE USE
Initial Set-up
Towing Vehicle Wiring
Initially the towing vehicle must be wired using the supplied two core power cable to be wired directly to the vehicle
battery terminals.
Specification
12V DC Nominal voltage
Minimum 18Ah battery
Initial Test Operation
In order to familiarise the operator(s) with the machine, first test the mechanism and controls on a flat surface,
without using a bale of fodder. Once happy with the principles of operation then test using a suitable round bale
before proceeding to use as normal.
Operating Limits
WARNING: DO NOT OPERATE BEYOND OPERATING LIMITS, DAMAGE TO MACHINERY OR INJURY TO OPERATOR
MAY OCCUR.
Minimum / Maximum Temperature: -5°C / +40°C
