OPERATING INSTRUCTIONS
Using the boom nozzles
• Five things must be considered before spraying with the boom.
1. How much chemical must be mixed in the tank?
2. Rate of spray (gallons per acre to be sprayed.)
3. What pressure (P.S.I) will be used.
4. Speed traveled (M.P.H.) while spraying.
5. Boom height and spray pattern
• Refer to the chemical label to determine the chemical mixture.
• See the tip chart to determine the pressure, speed and rate of spray to be used for your
application.
• Check the spray pattern with water only. Usually you can see the coverage better on a
solid concrete surface, such as a driveway.
• Raise or lower the nozzles so that you will have a good coverage pattern. If you can see
dry spots on the concrete surface you will need to raise the nozzles. Too much solution in
the pattern areas means you need to lower the nozzles. Generally the proper height will
be from 13 inches to 18 inches from the ground.
2E
5E
ASSEMBLY INSTRUCTIONS, continued
Spray Boom Attachment
1.) Attach the two upright spray boom brackets to your lawn trailer, ATV angle brackets
or other application using the four 5/16-18 x 1 bolts and 5/16 nuts.
2.) Attach the spray boom to the upright spray boom brackets using two 5/16-18 x 1 bolts
and 5/16 nuts.
3.) Thread on the boom hose to the manifold valve installed previously and tighten
securely.
4.) Optimum boom height is 14 to 15 inches above area to be sprayed. Use the location
holes in the upright spray boom brackets as adjustments to obtain the optimum
spray height.
Ref. #
Part Number
QTY
Description
1
RP00026
1
Kit, 7’ Boom Brackets
2
RP00012
1
Spray Nozzle, 2.0, Gray
REPLACEMENT PARTS KITS
2
1
1
1
1
1
1
1
1
1
1
