PERMANENT FIREBASE INSTALLATION
Use a permanent firebase for better
performance and easier maintenance.
1. Place only the required amount of
washed sand into the fire chamber
as specified in the table opposite.
2. Without compacting the sand, mould
it into a shallow “birds nest” shape
measuring about 70mm deep at the
centre, rising to 120mm at each side.
3. Using the correct firebase tile pack
for your size Chimenea as
designated on the packaging; place
the round tile centrally in the
“bird’s
nest”. Add remaining ceramic tiles in
circles around the centre tile; as
shown on the firebase tile pack.
4. Use a couple of handfuls of sand
as “grout”; spread around across
the top of the tiles to fill in between
the gaps. Firmly pat the sand
around the top and remove any
excess sand.
Permanent
Firebase
Sand
Product Size
Washed Sand Amount
Firepit
8-10 Litres
Small Chimenea
8-10 Litres
Medium Chimenea
12-15 Litres
Large Chimenea
14-17 Litres
Extra Large Chimenea 17-22 Litres
- 4 -
