• The Chimenea requires 1.5m
clearance from the top of the
chimney to any combustible surface
above such as a pergola, sailcloth,
awning etc.
• Only use the Chimenea on a non
combustible surface (not timber).
• Ensure the Chimenea is at least 1.5m
from any combustible surface.
• If you have a spark arrestor
accessory ensure it is in the
correct position following the
instructions supplied.
• Follow the correct lighting and fire
management advice included in
these instructions to ensure that you
get the most out of your product.
• When not in use, ensure Protective
cover (Raincoat accessory sold
separately) is on correctly or that
the unit is stored undercover.
• After approximately every 5 to 7
fires the ash should be removed so
the height of the fire is not
continually raised.
• If possible, position the Chimenea
where the fire can be seen from
inside the house as well as the out
door area.
• A Chimenea performs better with its
back towards any prevailing breeze.
• To ensure the Chimenea performs
correctly check that the chimney is
vertical, by viewing both from directly
in front and from the side.
SAFE POSITIONING
GENERAL CARE & MAINTENANCE
- 2 -
