CHAOS Nitro Pro 600, Instruction Manual

Page: 19 / 42

P600NT2B
P600NT1A
P600NT2EA
When securing metal parts, apply a
small amount of thread lock.
Secure the MR148 bearing in place with a small amount of CA glue.
Avoid allowing any glue to contaminate the bearing. This may cause
poor results or total binding of the bearing.
When inserting the Torque Tube into the tail boom, apply a film of oil
and use the provided PVC packing tube to secure the bearing holder of
the torque tube into the tail boom while maintaining a square position
relative to the tail boom.
Tips for assembling the Torque Tube
When assembling the torque tube into the tail boom
section, apply a light film of oil to the torque tube to
allow for smooth assembly. Once assembled check
for smooth rotation and adjust as needed.