![Channel Vision WA-320 Instructions Manual Download Page 4](http://html1.mh-extra.com/html/channel-vision/wa-320/wa-320_instructions-manual_2590062004.webp)
Accessories & Complementary Products
(sold separately)
A0240...
2-channel 40 Watt amplifier. It can be used to
power a small 1-room audio system or integrated with
Channel Vision’s A0302 to provide supplemental power to
low power distributed audio systems.
In-wall and In-ceiling Speakers...
Channel Vision offers a
full line of premium in-wall and in-ceiling speakers. These
speakers are perfect for whole-house music or home
theater applications.
VC-302...
Impedance Matching Volume Control
The VC-302 is an impedance matching volume control with
an IR receiver knockout. The knockout allows Channel
Vision’s IR-2400 to be integrated with the volume control for
applications that require IR repeating. The VC-302 comes
with white, ivory, and almond knobs and face plates to
easily match other wall plates in the room.
Linking the WA-360 to the WA-320
The WA-360 and WA-320 operate on a 1-to-1 basis and therefore they must
be “Linked” to each other prior to the first use. Once linked they will maintain
their paired status even if a power loss occurs. The “RST” button can be used
to reset and separate a linked pair.
Press the link button on the receiver within 6
seconds to complete the process.
Note: The green PWR/LINK LED will blink
until the receiver has been linked.
WA-320
WA-360
5
4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with these
instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. This apparatus must not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
13.
Warning: To reduce the risk of electric shock, do not remove the cover (or
back), no user serviceable parts inside, refer servicing to qualified service
personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
Make sure you have steady audio source
playing into the WA-320.
Press and hold the Link button for 3 seconds
to begin the linking process.
The green PWR/LINK LED will turn orange.
The WA-320 can broadcast on 8 different
channels.
If you encounter interference,
press the link button on the WA-320 to skip
to a different broadcast channel.