Control Codes
6
POWER
AV1
AV2
AV3
AV4
AV5
AV6
OUT-1 OUT-2 OUT-3 OUT-4
TM
channel vision
TM
channel vision
P-0120
P-0120
12ED
10EF
1AF5
1EE5
1BE4
1FE0
17EB
09F6
06F9
03FC
03FC
00FF
08F7
05FA
02FD
0FFD
0BF4
01FE
04FB
07F8
0AE5
4EB1
53AC 4FB0 51AE
RS-232 Control Code:
Baud Rate: 9600, No Parity, 8Bit Data, 1 Start
bit, 1 Stop bit
Each transmission = 8 ASCII bytes
Note: When the P-1421 receives a command it will respond to the controller
with a confirmation code.
Note: Some controllers may not accept ASCII strings. The HEX equivalents
for each command are listed below.
Using the Remote:
The model P-0120 remote control comes with
the P-1421 Matrix Switcher to allow easy source
selection without having to use the buttons on
the front the P-1421. The buttons are arranged
in 4 columns and 6 rows. There is one column
for each output and one row for each source.
For example, to select source 6 to be output in
zone 4, press the button in the lower right hand
corner of the remote.
Using advanced control systems:
For installations that require more sophistication
the P-1421 also supports RS-232 making it well
suited for use with Creston, AMX, and other
automation systems that support RS-232.
7
Specifications:
(typical)
Video Supported:
480i/p, 720p, & 1080i/p
Video Bandwidth:
325MHz (-3dB), 200mVp-p
Video Crosstalk:
<80dB @ 5MHz
Audio Supported:
Stereo Audio, 20Hz~20kHz
Control Method:
RS-232 and hand held remote
Power Supply:
12VDC @ 2A
Power Consumption (max):
1.2A
Safety Approvals:
CE, FCC, RoHS(2002/95/EC)
Dimensions:
1.73"H x 17.37”W x 7.87”D
Shipping Weight
2.15Kgs / 4.74lbs.
Specifications subject to change without notice.
Response
SBALONAK
SBALOFAK
SBUDxxO1
SBUDxxO2
SBUDxxO3
SBSYSLOK
SBUDxxO4
SBSYSULK
SBRSTACK
SBSTATAK
Ask status
Request status information.
SBASKSTA
reset
Unit is reset and every output comes
from the 1st input
SBALLRST
Locked toggle
off
When locked off, RS232, IR, and front
panel buttons are enabled
SBSYSMUK
Locked toggle
on
When locked on, only RS232 control is
enabled (front panel buttons are disabled)
SBSYSMLK
Channel 4
setting
Changes the 4th output signal. xx is
the selected source. xx=(01,02,...,06).
SBIxxO04
Channel 3
setting
Changes the 3rd output signal. xx is
the selected source. xx=(01,02, ..., 06).
SBIxxO03
Channel 2
setting
Changes the 2nd output signal. xx is
the selected source. xx=(01,02, ..., 06).
SBIxxO02
Channel 1
setting
Changes the 1st output signal. xx is
the selected source. xx=(01,02, ..., 06).
SBIxxO01
Power off
System power off
SBSYSMOF
Power on
System power on
SBSYSMON
Function
Description
Command
HEX Response
53,42,41,4C,4F,4E,41,4B
53,42,41,4C,4F,46,41,48
53,42,55,44,30,xx.30,31
53,42,55,44,30,xx.30,32
53,42,55,44,30,xx.30,33
53,42,53,59,53,4C,4F,4B
53,42,55,44,30,xx.30,34
53,42,53,59,53,55,4C,4B
53,42,52,53,54,41,43,4B
53,42,53,54,41,54,41,4B
53,42,41,53,4B,53,54,41 Request status information.
Ask Status
53,4241,4C,4C,52,53,54 Unit is reset and every
output comes from the
1st input
Reset
53,42,53,59,53,4D,55,4B When locked off, RS232,
IR, and front panel buttons
are enabled
Locked Toggle
Off
53,42,53,59,53,4D,4C,4B When locked on, only
RS232 control is enabled
(disables front panel buttons)
Locked Toggle
On
53,42,49,30,xx,4F,30,34
Changes the 4th output
signal. xx is the selected
source. xx=(31,32, ..., 36).
Channel 4
Setting
53,42,49,30,xx,4F,30,33
Changes the 3rd output
signal. xx is the selected
source. xx=(31,32, ..., 36).
Channel 3
Setting
53,42,49,30,xx,4F,30,32
Changes the 2nd output
signal. xx is the selected
source. xx=(31,32, ..., 36).
Channel 2
Setting
53,42,49,30,xx,4F,30,31 Changes the 1st output
signal. xx is the selected
source. xx=(31,32, ..., 36).
Channel 1
Setting
53,42,53,59,53,4D,4F,46 System power off
Power Off
53,42,53,59,53,4D,4F,4E System power on
Power On
HEX Command
Description
Function
