manualshive.com logo in svg

Channel Vision DVR-4JN, Instructions Manual

Share
Download
Channel Vision DVR-4JN Instructions Manual Download Page 23

 

22

 

SENSOR SETUP:

                                                                           

 
 
 
 
 

 
 
 

# 

The “Sensor Setup” menu is utilised by both the motion detection and 

alarm features.   

# SENSOR RECORD TIME

: Selects record time from 0 ~180 seconds. 

# ALARM ON TIME

: Selects alarm ON time from 0 ~ 30 or continuous. 

# SENSOR SETUP

: Used to define the sensor operation. Each channel can 

be set to Normally Open, Normally Closed, or Not Installed. 

Use the

▼

 and 

▲

 buttons to select Channels 1 

~ 4 and the   

 

 button to 

toggle through the options. 

Press the 

 button to exit.

 

   
   
 
 
 
         
   
   

# SENSITIVITY

: Sets the sensitivity level for Motion Detection. The range is 

from 0 (OFF) to 5 (maximum). 

Use the

▼

 and 

▲

 buttons to select the sensitivity for each Channel and 

the 

 

 

button to select the level. 

 

SENSOR  SETUP 

              SENSOR    RECORD    TIME      0 
              ALARM    ON    TIME                  0 
               
                SENSOR SETUP 
                MOTION SETUP 

 

   PRESS (<,>) THEN (SELECT) 

PRESS (MENU) TO EXIT 

       

         

SENSOR SETUP 

               
  CHANNEL-1   NOT INSTALL 
  CHANNEL-2   TYPE:NORMAL-OPEN 
  CHANNEL-3   TYPE:NORMAL-CLOSE 

CHANNEL-4   TYPE:NORMAL-OPEN 
 

   PRESS (<,>) THEN (SELECT) 

PRESS (MENU) TO EXIT 

Summary of Contents for DVR-4JN




































Reviews:

No comments

Brands by name

Popular brands

Load more brands