Programming the Keypad
Using the Access Keypad
500ft.
max
The diagram below shows how to connect the DS3-xxxxC to Channel
Vision’s CAT5 Whole-House Intercom system. When the button is pressed
on the DS-xxxxC the ST-2000 Intercom Stations will generate a door chime.
Pressing Answer/End will open communication with the DS3-xxxxC. Model
DS3-6xxxC includes a color camera and DS3-0xxxC includes no camera.
Channel Vision
Compatible
(
-xxxx )
CAT5 Intercom
DS3
C
P-0930
PRO
C
H A N N E L
T M
V
I S I O N
Model
P-0930
Whole-House Intercom
Page Out
Page Trigger
IR
Emitters
+15VDC
Power
Link
In
Link
Out
Hub
A
B
C
D
Room 1
Room 2
Room 3
Room 4
Room 5
Room 6
ST-2000
Press here to
answer door
These terminals can be
used to connect a ST-C5IDS
Door Strike Relay Module
Room 1
Room 2
Room 3
Room 4
Room 5
Room 6
Monitor
DND
Answer/End
Page
Using CAT5 wire, connect the
P-0930 to the 110 connector
on the door station
Power Light: Standby (Red)
Active (Green)
IMPORTANT:
if power light
does not
illuminate,
immediately disconnect
power supply and check
for correct polarity.
#
0
*
9
8
7
6
5
4
1
2
3
System password (default is
4567
) is required to enter system setting
modes. The reader will send a beep sound to indicate entering system setting
modes. If there isn’t any action within 20 seconds, the system will escape
from the setting mode. When programming, the “#” key is used as the
Confirmation or “Enter” key. In most cases “*” is used to clear an entry or exit
Set (or change) the 8 user passwords
Press:
* # [system password] #
System Reaction:
One beep
Press:
3
Then enter 1-8 (example:”1” for the first password, “2” for the
second, “3” for the third, etc.)
Press:
[enter the 4-digit password]
System Reaction:
One beep (Password changed successfully)
Optional: [enter 1-8 to set another password] [enter 4-digit password]
Press:
*
(to exit process)
System Reaction:
One beep (Process completed)
8
9
DS3-xxxxC
External Indicator Light (Orange)
Luminous keypad - 10 entry buttons
2 function keys
Features
Keypad connections
h
h
h
h
Stores up to 8 different door opening passwords
Anti-tamper design and alarm will activate if unit is moved
Door opening setting adjustments 01-99 seconds
Power supply : DC 12V. 80 mA (standby), 110mA (active)
