Channel Vision DP-8000 Series, Installation Manual

Page: 9 / 32

7
Instruction
Center: 0000 + #
Call: #
Unlock: # + PSW + #
Name: ▲ or ▼
Basic Operation Basic Functions
Calling Indoor Monitor
• Input floor and room number (at least 3 digits),
then press # to confirm. If you do not press pound
the unit will automatically call after 2 seconds.
• You can also make a call by searching through
the phone book. To search the phone book,
press the up or down arrow on the keypad,
then press # once you have found the person
you wish to call
• If the indoor monitor you are trying to reach is
unavailable, the outdoor panel will display “Busy”,
then auto return to standby mode.
• Press the
✱
button to end communication
at any time during the call
Calling Management Center
• Dial “0000” then press # to call
the management center
• If the management center is busy or unavailable,
the outdoor panel will display “Busy”,
then auto return to standby mode.
• Press the
✱
button to end communication
at any time during the call.
• Video intercom with indoor
monitor & management center
• ID card reader -
Supports a maximum of 10,000 cards
• Access password unlocking
• Supports standard SIP protocol
to communicate with IP phones
and SIP software
• Phone book search and direct dial
Unlocking the Door
1. Unlocking by Access Password
• Press the # key, enter the access password
(default is 000), then press the # key
to confirm
2. Unlocking by IC/ID card
• Hold the IC/ID card up against the
card reader area of the SIM Intercom
Front Display
Call Guard / Management
Call a room directly
(e.g. 1111#)
Unlock door from keypad
(e.g. #123456#)
Search Directory