2
Model IC504
Installation:
h
h
h
h
h
Use the provided template to mark and cut a 6½” hole in
drywall away from ceiling joists.
We recommend wiring with AWG 16 or larger, stranded
wire.
For proper phasing, both voice coils must be wired alike.
Connect red wires to red terminals on speaker and to red
or plus terminals on amplifier.
Install IC504 in the hole. Tighten the mounting screws.
The mounting dog ears will rotate outward and grip the
drywall.
To control the volume of the speaker locally, use an
impedance matching volume control, such as the
Channel Vision VC-302.
Mounting screws (4)
3
Specifications:
Frequency range:
Power Handling:
Drivers:
Impedance:
Finish:
Dimensions:
80Hz - 20kHz ± 3dB
80 Watts
1- 0.5” High compliance polymer
tweeter
1- 5.25” polypropylene woofer
8 ohms
ABS plastic
8” OD. 3
(Depth from surface of wall board)
”
Deep
Specifications subject to change without notice.
Features:
Cost Effective
Easy to install
5.25” High performance in-ceiling loudspeaker
Polypropylene woofer with butyl rubber surround
Small perforated designer grill
Recommended power: 80W (peak)
Pre-construction brackets sold separately
