ARIA Audio Source Volume Level Compatibility:
The audio output level from streaming sources can vary from brand to brand.
Although the A0325 has been adjusted to be equal to the output of most audio source
devices, in some cases the level may be different. Most devices have their own
adjustable volume level. It is recommended that this be used to adjust the output
level to match the main audio source’s volume level.
Operation & Indicators:
1. 2 LED’s flashing indicates ARIA is “OPEN” for any user to pair
2. Green LED is slowly flashing every 3 seconds indicates a user is
connected and can play music at any time.
3. Power LED solid: contact Channel Vision
4. Automatically connect when entering the room, this can be turned on and
off by the app.
5. App. when setting up the app, all users now must set up the app to
connect to the A0325 at least one time. The users phone will be
remembered each time in the future.
6. Using the A0325 with your stereo receiver or other amplifier (besides the
ARIA or Channel Vision Product), may require L & R output. See our
website for optional model A0305 and A0326.
Green/White - Left channel ground
Green - Left channel
Orange/White - Right channel ground
Blue -
Blue/White -
Orange - Right channel
Brown/White - Ground
Brown - 24vDC
TIA-568A RJ-45 Modular Plug
Side view:
Top view:
Symptom
Warning: Do not adjust the volume all the way up if no audio is present. Doing so could
damage your speakers if audio reconnects.
1. Both front lights are flashing on the front of ARIA plate
Ans. blue tooth source is not connected
Sol. begin w/app setup instructions, starting with the app before the phone settings
1. Verify the music source is active before pairing
2. A slow green flashing LED indicates when the blue tooth and ARIA streaming receiver are
paired, turn up the volume on the audio of your smart phone and/or amplifier.
3. Try a different streaming source receiver source device.
4. Verify streaming source receiver music source (i.e. phone/tablet) device is in play mode
Troubleshooting Steps
Not linking with
streaming source
receiver device
Linking with streaming
source receiver
device, but no audio is
present
not used
not used
2-cond power input option
optional Audio
input
Audio
output
to Amplifier
Factory jumper setting when
used with 100 watt amplifier
Blue tooth setting is 1 & 2
pins covered with jumper
