Power Supply
(included)
Power Supply
Adaptor
(included)
TV outputs
(8)
Power LED
Modulator inputs
(2)
Antenna/CATV
Model 3308
Top View
Accessories
2
The 3308 Coaxial Cable Panel is the heart of a multi-
room video distribution system. The 3308 connects as
many as 8 televisions to cable or antenna, while
maintaining compatibility with ChannelPlus video
modulators and the ChannelPlus bi-directional IR
repeating system.
Model 2010
Power Injector wall plate
(fits standard Decora)
Model 2184
IR Breakout
Replaces the power supply
adaptor and drives up
to four IR emitters.
+12
GND
LED
-
+
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
LOSS-LESS COAX PANEL
The model 3308 works like a zero-loss splitter! The
signals you put on the antenna/CATV input will
appear on the outputs at the same power.
Typical System
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
FREEDOM OF PLACEMENT
Put the 3308 coax panel where the coax is: in the
attic, in the basement or in the wall of the garage.
The single coax from a model 2010 carries power,
the RF signals and IR repeating signals.
Remote Power Using the Model 2010
Model 2010
Power Injector
IMPORTANT:
The model 2010 must connect to
the
port. If the
2010 is not being used, then
install a 75 ohm terminator here.
Modulator B +Pwr
3
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
Shielded 75 ohm coax is
required. We recommend RG-6.
Modulators may be connected
to the ‘A’ or ‘B’ ports.
MODULA
TORS
INPUTS
A
B+Pwr
OUTPUTS
model 3308 Coax Panel
To TVs
Ant
/
CA
TV
INPUT
R
+15Vdc
IR
Out
Gnd
For use with model
2100A IR wallplates
Power Supply
(included)
Power Supply
Adaptor
(included)
TV outputs
(8)
Power LED
Modulator inputs
(2)
Antenna/CATV
Model 3308
Top View
Accessories
2
The 3308 Coaxial Cable Panel is the heart of a multi-
room video distribution system. The 3308 connects as
many as 8 televisions to cable or antenna, while
maintaining compatibility with ChannelPlus video
modulators and the ChannelPlus bi-directional IR
repeating system.
Model 2010
Power Injector wall plate
(fits standard Decora)
Model 2184
IR Breakout
Replaces the power supply
adaptor and drives up
to four IR emitters.
+12
GND
LED
-
+
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
LOSS-LESS COAX PANEL
The model 3308 works like a zero-loss splitter! The
signals you put on the antenna/CATV input will
appear on the outputs at the same power.
Typical System
R
Satellite receiver
Modulator
Antenna/CATV
Up to 8 TVs
FREEDOM OF PLACEMENT
Put the 3308 coax panel where the coax is: in the
attic, in the basement or in the wall of the garage.
The single coax from a model 2010 carries power,
the RF signals and IR repeating signals.
Remote Power Using the Model 2010
Model 2010
Power Injector
IMPORTANT:
The model 2010 must connect to
the
port. If the
2010 is not being used, then
install a 75 ohm terminator here.
Modulator B +Pwr
3
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
IR
EMITTERS
POWER
15VDC
SYSTEM POWER
FROM
MODULATOR
VIDEO SYSTEM
Shielded 75 ohm coax is
required. We recommend RG-6.
Modulators may be connected
to the ‘A’ or ‘B’ ports.
MODULA
TORS
INPUTS
A
B+Pwr
OUTPUTS
model 3308 Coax Panel
To TVs
Ant
/
CA
TV
INPUT
R
+15Vdc
IR
Out
Gnd
For use with model
2100A IR wallplates
