background image

Monitor

Power cable AWG 26 or larger

RG-59 or RG-6 coax
A long cable run (150ft or more) can noticeably 
reduce the picture brightness and increases the 
possibility of ground-loop hum.

VIDEO DISTRIBUTION SYSTEM

R

DUAL VIDEO MODULATOR / BROADBAND AMPLIFIER / IR REPEATING SYSTEM

Antenna 
or cable

Using an All in One Video Distribution System such as a 
ChannelPlus model 3015, you may view the camera on an 
unused UHF or cable channel. (For example, the front door camera
could be UHF channel 50. All antenna channels will appear normal.)

Connecting the Camera

Viewing the Camera From All TVs in a House

Attach front piece with
2 4-40 x .375“ machine screws
(just start the screws)

Slide lens of camera through 
hole in camera mount.

Slide lens lock behind camera lens 
and tighten machine screws. 
(Align camera before screws are tight.)

Attach wires to PC board.
Attach PC board to mount.

The connector on most cameras
is on the bottom of the board.

On a typical Camera:

Video is Yellow

All other colors are ground.

+Vdc is Red

Video

Video Ground

+Vdc

Ground

Assembling the camera to the mount

6

3

Summary of Contents for 7101C

Page 1: ... of purchase or MTI will repair or at its option replace the defective product To obtain warranty service call MTI for a return material authorization RMA number and return the product prepaid to Multiplex Technology Inc 3001 Enterprise Street Brea CA 92821 Attention Customer Service Please put the RMA number on the outside of the carton Any implied warranty arising from the sale of the product in...

Page 2: ... versatile solid state cameras designed to fit standard deep double gang J boxes The power supply terminals and BNC video connector are mounted on a PC board for maximum ruggedness and dependability Although this camera mount is intended for use indoors or under an eave a drip cap is supplied for use in exposed areas Model 7120 Color Camera 512x492 pixels 4 lux 3 6 mm lens Smoked lens Includes pow...

Page 3: ...mple the front door camera could be UHF channel 50 All antenna channels will appear normal Connecting the Camera Viewing the Camera From All TVs in a House Attach front piece with 2 4 40 x 375 machine screws just start the screws Slide lens of camera through hole in camera mount Slide lens lock behind camera lens and tighten machine screws Align camera before screws are tight Attach wires to PC bo...

Page 4: ...ength Coax is very stiff A long length of coax will not bend into the box Connect coax and power wires 4 3 2 1 Locating the Camera The 7100 series cameras work best when they are looking down on their subject For a front door application place the camera about 7 feet off the ground adjacent to the door Aiming the Camera Attaching the Window Insert 1 8 screwdriver in the steering slot below the len...

Reviews: