Internet-to-TV Powerline Ethernet Adapters
14
If the user finds two newly purchased devices are not able
to communicate with each other, please press the “reset-to-
factory-default” button while the device is plugged in and
powered on to reset the device back into the factory default
Powerline Network Group, HomePlugAV. If the devices are still
not working, please read the other sections in this user manual
for Frequently Asked Questions (See page 24) and device
Trouble Shooting(See page 28).
Standby Mode
If there is no Ethernet cable connected to the Internet-to-
TV Powerline Ethernet Adapter device over two minutes, this
device will go into standby mode automatically to save power
consumption and its POWER LED will blink ON and OFF at a slow
rate. To exit the standby mode, insert the Ethernet cable or plug
the device in again.
Note:
1. Some computers support Wake up LAN function that may
cause our PLC to enter the standby mode.
2. Internet-to-TV 4-Port Powerline Ethernet Switch product
doesn’t support standby mode.
