Changzhou Smoothies Electronics Jumper T16 User Manual Download Page 27

 

Before Use

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
 cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that 
interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful 
interference to radio or television reception, which can be determined by turning the equipment off  
and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the 
following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that 
   to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:  Any  changes  or  modi

cations  to  this device  not  explicitly  

approved  by  manufacturer could void your authority to operate this equipment.

This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  
to  the  following  two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference that 
may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.

Summary of Contents for Jumper T16




























Reviews: