Integration instructions for host product manufacturers according to KDB 996369 D03
OEM Manual v01
2.2 List of applicable FCC rules
Part 15.247 and Part 15.407
2.3 Specific operational use conditions
The module is limited to installation in mobile or fixed application.
A separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and difference antenna configurations.
2.4 Limited module procedures
Not applicable as this is not a limited modular.
2.5 Trace antenna designs
Not applicable as there is no trace antenna design in this modular.
2.6 RF exposure considerations
For the end host, the antennas used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be collocated or operating
in conjunction with any other antenna or transmitter.
2.7 Antennas
For BT&LE
Ant.
Brand
P/N
Antenna Type
Connector
Gain (dBi)
1
TB-SR-41Y
Dipole
N/A
2.76
For WIFI 2.4G &5G
Ant.
Brand
Model Name
Antenna Type
Connector
Gain (dBi)
1
N/A
PCB
N/A
3.95(2.4G)
3.33(5G)
2
N/A
PCB
N/A
3.95(2.4G)
3.33(5G)
2.8 Label and compliance information
Host product manufacturers are required to provide a physical or e-label stating “Contains
FCC ID: 2AFG6-WF-Q379-USA1” with their finished product.
2.9 Information on test modes and additional testing requirements
Test modes should take into consideration different operational conditions for a stand-alone