Connecting to a Wireless Network
• To use a wireless network, your TV must be connected to a wireless IP sharer. If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to
connect to the wireless network.
Wireless Network Configuration
1
. Turn on your TV, press the MENU button on your
remote, use the
◄
/
►
button to select Network, and
then press the ENTER button.
2
. Select Wi-Fi Network then press the ENTER button.
–
Wi-Fi:
Determines whether to connect to the network
wirelessly.
–
Base Station: Searches for available wireless
networks.
Press the
▲
/
▼
button to select the desired network:
View Detail:
Press yellow button to see the detailed
information of a network.
Disconnect: Press red button to disconnect to a
network.
Refresh: Press green button to refresh the list.
–
Configuration
：
Press the
▲
/
▼
button to select Configuration, and then press the
ENTER button.
Conf.: Select DHCP to set the IP address, netmask, gateway and DNS values
automatically, or Static to set them manually.
IP: The TV’s IP address.
Netmask: Value of the Netmask.
Gateway: Address of the Gateway.
Menu Operation
DNS: Address of the DNS.
The LAN Port on the Wall
Wireless IP sharer
LAN Cable
The TV with Built-in Wireless
23